Flexible moulding is prepared from a multifarious polymer resin which permits to adjoin trim to the arches of window, bent walls and so many other particular applications. This can easily be warped or curved without any kind of splintering or weakening. Sometimes for sharper bends, the producer may pre-bend the selected pieces. It can be purchased within a specific grade range; it ranges from incredibly flexible to completely rigid. Engineers and interior designers will be benefited from this kind of exceptional and exclusive building product in the work of creating curves which flawlessly mix up with further mill work.
Flexible moulding can be shaped or designed according to the designer's visualization. All kinds of decorations are available to meet the needs furniture like chairs, window casements, cornices, crowns and baseboards. It should be kept mind that flexible moulding should only be utilized where it is really necessary this is because it is really an expensive product than the wood millwork.
One of the biggest features of flexible moulding is its appearances and the superiority of the wood. It can be easily painted, stained, or sealed as the regular moulding. It doesn't deform, split, wear or doesn't get affected by mildew, as a reason it is great for outdoor use too.
There many advantages for this molding, as it permits the owner to upgrade their own house in such a conception that is becomes totally new, exclusive, and blends itself with the original design.
Advantages of Flexible Moulding
- Can be nicely finished just like wood
- Durability is satisfactory, as a reason it can easily be used in the exterior of the house
- Opposes moisture
- The flexibility is a major benefit
- Totally insect resistant
- Posses the appearance of original wood
- Possible to paint just as wood
- Various kinds of designs are available for this
- This has the ability to be cut, shaped or sawed just like wood
- Simple installation
- It also can be easily glued, nailed or drilled
- This kind of moulding is not really affected by cold, heat, moisture or salt
Suggestions for pre installation foundation of flexible moulding:
Pre-installation requirements-
1. Put the moldings in room forty eight to seventy two hours before the time of pre-installation process so that it enables the moulding to adjust to the dampness level and the temperature of that room
2. Moulding should be stored in dry; low damped and proper ventilated area
3. It should never be stored outdoors
Requirements for surface preparation-
1. All surfaces should be cleaned and dirt-free as much as possible.
2. The place surrounding the installation area is totally dry before the installation process.
No comments:
Post a Comment